Expert Answers about Honda

• Replacement Parts for Reese Under-Bed Rail and Installation Kit on 2019 Ford F-250
• We do have the brackets for the # RP87FR which are the Inner Frame Brackets # RP27FR. The puck plugs are # 58199 and then for the gooseneck hole cover # RP30136. The missing hardware is not something that we have right now since Reese has had issues with keeping certain things in stock. I would check with them directly to see if they can supply it. You could also look at the list of parts below to identify what you're missing and potentially source it locally at a hardware store.
  view full answer...


• Recommended Flat Towing Parts for a 2024 Jeep Wrangler 4xe
• Aside from the Demco SBS Stay-IN-Play DUO item # SM99251, to flat tow your 2024 Jeep Wrangler 4xe you will need the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item # e74ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521453-5 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or item # RM63MR if you have the ParkSense proximity sensors High Low Adapter - The tow bar needs...
  view full answer...


• Replacement Brake Kit, Surge Actuator, and Bearing Kit for a 1988 EZ Loader Boat Trailer
• Hey Scott! Both the 3,500 lb and 3,750 lb brake assemblies work with a 10" x 2-1/4" drum so either one will fit with your hubs, but you can verify your axle capacity either on the sticker tag on the side of your EZ Loader Trailer, or by looking at the tag in the middle of your axle(s). One you know what weight capacity you have then I recommend getting Free-Backing brakes so you'll be able to back the trailer up. For 3,500 lb brake assemblies this will be part # AKFBBRK-35 and for 3,750...
  view full answer...


• Replacement Shock for Trailair Air Ride and Flex Air 5th Wheel King Pins
• Yes, it will! The Replacement Shock for Trailair Air Ride and Flex Air 5th Wheel King Pins item # LC177223 is exactly what you need for your LIP158777 pin box.
  view full answer...


• Does Replacement 7 Quart Vertical Pump Assembly LC251910 Need to Mount Vertically
• Hey Steve, so the Replacement 7 Quart Vertical Pump Assembly for Lippert Components Hydraulic Leveling System # LC251910 that you have is a vertical only setup. If yours isn't vertical that would be why it is leaking and you'd need to reposition it.
  view full answer...


• Is Gasket Needed to Mount Low Profile LED Combination RV Tail Light w/ Bracket
• You do not need a gasket to mount the # RVSTL11 or # RVSTL10. Both have mounting holes on the back that allow them to mount directly on the surface of your trailer.
  view full answer...


• Recommended 5th Wheel Rails for a 2024 Ram 1500
• To add a set of 5th wheel rails to your 2024 Ram 1500, I recommend the Curt item # C16307-204. This set of rails is industry standard which means it will work with most 5th wheel hitches on the market. The brackets are custom fit and install in pre-existing holes in your Ram's frame. To make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C56070. This harness puts a 7-way connector in the bed of your Ram and allows you to keep...
  view full answer...


• Can The 5' Bunk Boards # CE27820 Be Used As Guide-Ons?
• Yes, the CE Smith Carpeted Bunk Boards # CE27820 can also be used as guide on bunks. We do have the Kit # CE27600 which uses these same bunks if you are needing everything.
  view full answer...


• How Many Bikes Can E-Bike Rack for 5th Wheel Application Carry
• I really wish there was a great solution but nothing we have works mainly because of the number of bikes. E-bike racks are primarily 2 bike racks and when you have to limit them to 5th wheel applications that makes it really hard. If for some reason you would only carry 2 e-bikes we have the Hollywood Racks RV Rider part # HLY64FR which is 5th wheel rated and has the weight capacity needed.
  view full answer...


• Replacement Hubs and Drum Brakes For a 2021 NuCamp TaB Trailer Using Dexter Axle Parts
• Thank you for providing the Dexter part numbers Robert. For the brakes we have the Kit # 23-26-27 which contains both the Left # 23-26 and Right # 23-27 brake assemblies. You might consider upgrading to the Nev-R-Adjust Electric Trailer Brakes # 23-468-469 so you will no longer have to adjust the brakes every 3,000 miles. They will self adjust giving you much better brake feel as the pads wear. For the hub/drum we have the Dexter Trailer Hub and Drum Assembly # K08-426-91. The difference...
  view full answer...


• Recommended 5th Wheel King Pin Lock that Can Be Keyed Alike
• No, I am sorry you can not. The AMPLock King Pin Lock item # AMP27FR doesn't have an option to be keyed alike. The only king pin lock I do have that you can get keyed alike is the etrailer item # e98896. You'll need to order all 10 at the same time and select the keyed alike option in the drop down above add to cart.
  view full answer...


• Determining Axle Spacing For An 8-Lug Tandem Torsion Axle Setup
• Hi Chad, When installing a tandem axle setup you'll want to have at least 4" of space between the tires to allow for suspension travel without having the tires touch. For example, with a 215/75R17.5 tire size, like part # LH28FR, you would need to space the axles at least 34.2" apart.
  view full answer...


• Which Pin Is Used for Running Lights on the Curt Auxiliary LED Indicator Lights 4-Way Connector
• Hey Richard! The running light function will be the wire that was closest to the ground pin on the Curt Auxiliary LED Indicator Lights # C53201 4-way connector. I haven't stripped back the cover on this kit before so I don't have any hands-on experience with what you're doing, but I can say that the ground pin is the covered one and then the next one next to it is the one you want to connect your registration plate light to. Attached is a photo of the vehicle side pin out for a 4-way...
  view full answer...


• Parts Needed To Tow A Trailer For A 2018 BMW X5 With A Stealth Hitch Hitch Rack Receiver
• Hi Gary, If you do have the Stealth Hitches Hidden Rack Receiver # SH56VR installed on your 2018 BMW X5 then you'll need the Towing Kit w/ Ball Mount and Trailer Wiring Kit # SH98VR in order to tow a trailer. This kit will come with the ball mount attachment as well as the wiring needed to pass your traffic signals back to the tail lights of the trailer.
  view full answer...


• How Much Height Does Curt OEM GM Rail Kit Adapter # C88KR Add to Hitch Height
• Hey William, yeah everything you mentioned is correct. The Curt rail kit adapter part # C88KR will add 2-1/2 inches to the hitch height so there is a good likelihood that you'll need to compensate for that by changing the hitch head height and/or the height of the pin box on the trailer.
  view full answer...


• Availability Of 5 Flat Adapter For A 2021 Ram ProMaster 3500
• Hello Howard, we actually do sell a kit designed specifically for this purpose with the Curt Trailer Connector Adapter # C57187. This plugs in to the existing 4-flat and will hardwire into the reverse light circuit on your ProMaster van. I am afraid I don't have a way to tell you exactly where to find the reverse light circuit. You may be able to get that info from a dealership. Otherwise the best way is to go in with a wire tester like part # PTW2993 until you find the reverse wire.
  view full answer...


• Replacement 2015 Ford F-150 5-1/2' Pace Edwards Jackrabbit Tonneau Cover Tarp
• Hey Bruce, The Replacement Cover for Pace Edwards JackRabbit Hard Tonneau Cover # PE48UV is exactly what you need for the Jackrabbit TR2105 cover on your 2015 Ford F-150 5-1/2' bed.
  view full answer...


• Can Curt A20 Sliding Hitch be Used With Reese Revolution on 5th Wheel Trailer
• Yes, you can use the sliding Curt A20 5th Wheel Trailer Hitch w/ R20 Slider # C16541 or S20 Slider # C55DR with the Reese Revolution kingpin so long as you lock out the hitch so it does not slide. In that case it will work just the same as any other non-sliding 5th wheel hitch. Also, I did want to mention that if you need base rails for your 2006 Ford F-350 the correct part (that is also compatible with the A20) is the Curt Custom Fifth Wheel Installation Kit for Ford # C16448-204.
  view full answer...


• Is Viking Solutions SwiveLift Hoist w/ Winch Easy to Disassemble
• The Viking Solutions SwiveLift Hoist w/ Winch # 310-VSL001 is very easy to disassemble. Although it does use bolts, you don't really need to remove them to take it apart for storage or transport. The column tube that holds the winch lifts off of the pivot tube which also allows you to remove the platform. Take a look a the picture attached below.
  view full answer...


• How to Determine Replacement Hubs For Carry-On Trailer
• I'm sure we can get you a hub assembly for your Carry-On 7X14GWRS trailer, though we don't have any way of knowing off-hand or cross-referencing what hubs you need. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle where the bearings...
  view full answer...